黄黄网-黄黄网站-黄黄网址-黄录像欧美片在线观看-人与禽性视频77777-人与禽一级一级毛片

您好,歡迎進入廣州雷邁機械設備有限公司網站!
一鍵分享網站到:

產品列表

PROUCTS LIST

相關新聞

NEWS

產品中心Products 當前位置:首頁 > 產品中心 > 粉碎設備 > 水冷式粉碎機 > 廣州捶打水冷式粉碎機

廣州捶打水冷式粉碎機

廣州捶打水冷式粉碎機

更新時間:2017-03-22

產品型號:FS250-4W

產品報價:

產品特點:廣州捶打水冷式粉碎機用途 產品介紹:  
Water mill-water-cooled universal mill parameter name:
粉碎機(不銹鋼粉碎機)、高效粉碎機、食品粉碎機、高速粉碎機、多功能粉碎機、化工粉碎機、制劑粉碎機,適用于食品、制藥、化工等行業的物料粉碎之用。禁用于粉碎易燃易爆品。

FS250-4W廣州捶打水冷式粉碎機的詳細資料:

 

 

廣州捶打水冷粉碎機用途 產品介紹:  

Water mill-water-cooled universal mill parameter name:

      粉碎機(不銹鋼粉碎機)、高效粉碎機、食品粉碎機、高速粉碎機、多功能粉碎機、化工粉碎機、制劑粉碎機,適用于食品、制藥、化工等行業的物料粉碎之用。禁用于粉碎易燃易爆品。

     Universal mill (stainless steel universal mill), efficient mill, food mill, high-speed universal grinder, multi-functional grinder, grinder mill, preparations of chemical industry, for food, pharmaceutical, chemical and other industries of crushing purposes. Banned inflammable and explosive products used to crush.

  聶

 

  廣州捶打水冷粉碎機結構簡潔、堅固,運轉平穩,粉碎物料快速、均勻,效果良好。本機全為不銹鋼材料制作,機殼內部(粉碎槽)所有齒槽經精密機加工從而達到表面平滑,易于清理,改變了普通粉碎機內壁粗糙、易積粉、難清理的現象,使食品、藥品、化工等生產更能符合國家標準,達到GMP的衛生要求。  

     Water mill-water-cooled universal mill parameter structure is simple, strong, smooth, crush the material quickly and evenly, with good results. This machine is all stainless steel, casing (crush Groove) all alveolar precision machining so as to achieve a smooth surface, easy to clean, change within the General mill coarseness, easy to accumulate powder, hard to clean, so that food, medicine, and chemical production more in line with national standards, meet the GMP requirements.  

 

技術參數:

型    號  Model

FS250-4W

FS320-4W

FS350-4W

FS400-4W

材    質  Material

304S.S

304S.S

304S.S

304S.S

電    壓  Volt(v)

380

380

380

380

功    率  Power(kw)

5.5

7.5

11

15

主軸轉速  Speed(r/min)

4200

4200

4200

4200

細    度  Fineness(mesh)

10-150

10-150

10-150

10-120

產    量  Output(kg/h)

30-200

50-300

70-500

100-800

外形尺寸  Dimension(mm)

750×600×1260

780×700×1350

800×900×1550

1450×1300×2000

重    量  Weight(kg)

180

260

320

600

 

 

廣州捶打水冷粉碎機工作原理:

Parameters of water mill-water-cooled universal mill working principle:

     本機粉碎原理錘式回風高速粉碎。粉碎物可直接從磨腔中排出,經出料口出來,一般的物料經過粉碎后要經過棉布袋來收集,粉碎后的物料收集在袋內,空氣則從布袋的細小孔眼出來,不會將細粉排出,從而起到不浪費,不污染的效果。粒度大小由更換不同目數的篩網決定。

     Principles of native smashing hammer high-speed Smash in return. Crushed can be directly discharged from the grinding Chamber, outlet, and generic material after crushing to cotton bags collected, crushed material collected in the bag, the air from the bag out of the small hole of, fines will not be discharged, so as to not waste and pollution effects. Grain size determined by the replacement of different mesh sieve.

 

     我司所研制生產的粉碎機是采用優質304號不銹鋼制作,配套國標電機,主要用于化工材料、中藥材含樹根、樹枝以及塊狀類物料、各種含油量不高的糧食、五谷雜糧以及其他一些硬性、脆性的物料。

     We develop and produce universal mill is made of high quality stainless steel No. 304, and supporting standard motors, mainly used in chemical materials, herb roots, branches and bulk material of low oil content, a variety of food, grains and other hard, brittle material.

特別注意:不得粉碎金屬,特堅固及高粘度物料.

Special Note: not crushing metal, sturdy and high-viscosity materials.

 

 

廣州捶打水冷粉碎機安裝、操作和維修保養:

Parameters of water mill-water-cooled universal mill installation, operation and maintenance of:

1、開機前必須檢查門是否關緊,關緊門時要擰緊手輪和定位螺栓。

Before 1, boot, you must check that the door is closed, close the door to tighten the hand wheel and the lock bolt.

2、接通水冷卻裝置,保證水源充足,運行是嚴禁斷水。

2, connect the water cooling, guarantee adequate water, running water is strictly prohibited.

安裝時,接通電源,以電動方式檢查電機旋轉方向是否按標箭頭方向。如相反,請調整電機接線盒接線。

3, installation, switch on the power, with electric check motor rotation direction according to the direction of the arrow. Instead, adjust the motor junction box wiring.

4、在電機旋轉方向正確的情況下,開機空運轉30分鐘,檢查潤滑情況,及時加潤滑油脂。定期檢查和補充潤滑油脂。

4, in the case of motor rotation direction is correct, boot time 30 minutes, check the lubrication, plus lubricating grease in a timely manner. Regularly check and supplement the lubricating grease.

5、進料前空運轉數分鐘,然后緩慢均勻地加料,切勿加滿料斗,并注意電流是否超負荷,防止損壞設備。

No-load operation for a few minutes before 5, feed, and then slowly feed evenly, do not fill the hopper and note whether current overload and prevent damage to equipment.

6、運轉中如有巨大振動及噪音等不良情況,要及時關機檢查。

6, operation, such as a huge vibration and noise and other adverse situations, to shutdown checks in a timely manner.

7、經常保持機件潤滑、清潔,發現故障、缺陷及時修復或更換。

7, keep lubricate, clean, find fault, defects to repair or replace.

 如果你對FS250-4W廣州捶打水冷式粉碎機感興趣,想了解更詳細的產品信息,填寫下表直接與廠家聯系:

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯數字),如:三加四=7
版權所有 © 2025 廣州雷邁機械設備有限公司  ICP備案號:粵ICP備19162433號
主站蜘蛛池模板: 日本全黄三级在线观看 | 午夜伦理在线观看 | 婷婷四房综合激情五月性色 | 免费人成网站线观看合集 | 亚洲国产精品二区久久 | 男人下身进女人阳道视频 | 亚洲欧美日本综合一区二区三区 | 另类欧美日韩 | 五月深爱婷婷 | 曰韩毛片| 免费看黄色片视频 | 精品一区 二区三区免费毛片 | 99插插| 欧美色穴| 成人黄色小视频在线观看 | 欧美一级免费 | 一个人看的www在线 一个人看的www在线播放 | 特黄色毛片 | 97国产大学生情侣11在线视频 | 日韩欧美动漫 | 91亚洲精品自在在线观看 | 小明永久免费看看 | 在线观看嗯啊成人动作片 | 欧美日韩免费在线视频 | 一本大道香蕉大69 | 国产成人精品一区二区免费 | 天天干天天射天天爽 | 亚洲伦 | 欧美精品成人久久网站 | 亚洲国产女人aaa毛片在线 | 麻豆日韩国产精品欧美在线 | 成年免费看片在线观看 | 国产精品视频免费视频 | 欧美一级在线免费观看 | 小毛片网站| 桃花岛亚洲精品tv自拍网站 | 日本高清无吗 | 久久网页| 国模啪啪一区二区三区 | 亚洲人体在线 | 一级片麻豆 |